FG50-50
Geofangrid FG is a biaxial geogrid made from fibre glass filaments
- Geofangrid FG is a biaxial geogrid made from fibre glass filaments, encased by a polymeric protective coating.
- This results in a high modulus of elasticity at low elongation that can offer a large increase in the effective service life of a road pavement structure.
FG50-50 General Application(s):
- sub-base reinforcement in pavements
- Superior resistance to high temperatures
- High resilience to chemical degradation
- Applications – pavement reinforcement designed to reinforce asphaltic concrete overlays, reduction of reflective cracking and applications in variable pH groundwater environments.
- FG Geogrid have equal tensile strength in both directions and has ultimate tensile strengths ranging from 25kN/m up to 200kN/m.
| Item | Standard | Unit | Specification |
|---|---|---|---|
| MD Tensile Strength CD | ASTM D 6637 | KN/m | 50 50 |
Elongation Ratio | ASTM D 6637 | % | ≤3 |
- (1) The above values are on an average basis, the data was obtained from in-house test laboratories, National test institutes, and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
- (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is outlined in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
- (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreement by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.
FG50-50 Shipping and packaging information
| Aperture size (mm) | Width (m) | Approx Load Q’ty per 40’HC(m2) |
|---|---|---|
| 25.4×25.4 | 3.95 | 60000 |
CERTIFICATES
FG50-50 Industry Product Equivalents
ACF ACF N031, ADS ADS 0311T, BP-Amoco Amoco 4535, Carthage Mills FX-30HS, Contech C-31NW, Crown Resources/TNS Crown R031, Dalco Daltex 1031, EXXON Exxon GTF-125, Hanes Geo TerraTex N03, L&M Supply LM 310, Maccaferri MacTex N11.1, Mirafi Mirafi 135N, Propex Geotex 311, Synthetic Industries SI 311, Skaps Skaps GT131, Thrace-LINQ LINQ 120EX, Willacoochee Industries WINfab 310N
This information is provided for reference only and is not intended as a warranty or guarantee. US Fabrics assumes no liability in connection with the use of this information.
