Geotextiles

Contents

[hide]

  • 1 Introduction
  • 2 Uses of geotextiles
    • 2.1 Separation
    • 2.2 Stabilisation
    • 2.3 Drainage
    • 2.4 Filtration
    • 2.5 Reinforcement
    • 2.6 Protection
  • 3 Related articles on Designing Buildings Wiki

Introduction

Geotextiles were originally developed in the 1950s for use in erosion control situations where soil retention and fabric strength was required, such as in sea walls. They are now used in a wide range of civil engineering applications, such as roads, embankments, retaining structures, airfields, railways, dams and reservoirs, canals, coastal defences, and so on. In addition, composite materials known as geosynthetics have been developed for products such as geogrids, geotubes and meshes, for a range of geoengineering applications.

Geotextiles are typically made using synthetic fibres such as polyester or polypropylene which create a flexible and porous fabric capable of providing strength and stability. There are three basic forms:

  • Woven: This resembles sacking.
  • Needle-punched: This resembles felt.
  • Heat-bonded: This resembles ironed felt.

Uses of geotextiles

Geotextiles have the ability to reinforce, protect, filter, drain and separate, and many applications use them alongside soil, placed at the tension surface for strength purposes.

The main uses of geotextiles include:

Separation

Geotextiles can be used to prevent the mixing of two soil layers of different particle sizes, such as landfill material and native soil, or stone material and subgrade soil.

Stabilisation

The geotextile acts as a separator, allowing water from soft natural soil to pass into a free-draining construction soil, which allows the natural soil to consolidate, thereby gaining strength and providing a more suitable surface for foundations.

Drainage

Geotextiles can be used to enable transmissivity, where the flow of water runs parallel to the plane of the geotextile. Superfluous water can be collected and discharged efficiently, particularly by needle-punched non-woven materials. The characteristic of transmissivity can be optimised using geotextiles of varying thicknesses.

Filtration

Geotextiles, of a needle-punched structure, can be used to provide an interface for the filtration of fine particles in soils. The structure of the geotextile enables fine particles to be retained while allowing water to pass through. As water passes through, soil is filtered out and builds up behind the geotextile, creating a natural soil filter.

Reinforcement

Due to their high tensile strength and soil-fabric friction coefficient, heavy geotextiles can be used as a reinforcement solution, using fill materials to reinforce earth structures. the geotextile is placed within the material, in the same way as with reinforced concrete. While stabilisation is achieved by allowing water to drain from unstable soil, reinforcement is provided for by the stress/strain characteristics of the geotextile which add strength to the whole system. This is as opposed to stabilisation, which places the geotextile on or around the required area.

Protection

Geotextiles are used to protect earth embankments from erosion. Leaching of fine material can be prevented by placing geotextiles in layers. Sloped, stepped shapes are also effective in protecting shorelines from storm damage. They can be made impermeable when impregnated with an asphaltic emulsion, making them suitable for use as moisture barriers, for example, in the repair of pavements.

In combination with steel wire fencing, geotextiles can be used to contain explosive debris during building demolitions.

  • Coastal defences.
  • Construction materials.
  • Geomembrane.
  • Glass bottle floor foundation.
  • Ground conditions.
  • Groundwater control in urban areas.
  • Groundworks.
  • Rebar.
  • Reinforced concrete.
  • Retaining walls.
  • Underpinning.

Retrieved from “https://www.designingbuildings.co.uk/wiki/Geotextiles”

  • Share
  • Add a comment
  • Send us feedback