Polyester woven geotextile fabric

Polyester woven geotextile fabric is made from the extrusion of polyester into either a flat tape or filament product which may be further processed by slitting or bundling and then weaving to form a fabric.

Woven geotextiles fabrics are ideally suited for applications of reinforcement or separation as the strength of tape or filament within the fabric will be increased to suit a specific application. compared with non-woven geotextile fabric, woven geotextile fabric develop high strengths at relatively low strains which is a very important requirement in the application of reinforcement.

we can supply those products following the standard of GRI-GT13 from Geosynthetic Institute(GSI), AASHTO-M288 from the American Association of State Highway and Transportation Officials, and GB/T17638 from China, which are commonly used and widely accepted testing industry standards.

Applications: 

• embankment support over soft soils

• embankment support over soft soils with wick drain treatment

• embankment support over piles

• support over voids

• load transfer platforms

Polyester woven geotextile is suitable for use in the short term as well as very long term ground support applications with a design live more than 100 years.​