HDC2
Composite Geomembrane
- The composite geomembrane is thermally bonded by non-woven or woven geotextile and HDPE geomembrane through calendering technology. Composite geomembranes have the advantages of geomembrane and geotextile at the same time.
- It is divided into one cloth, one membrane, and two cloths, one membrane, wide width of 4-6m, weight of 200-1500g / m2.
- It has tensile, tear resistance, bursting, and other physical and mechanical performance indicators High, the product has high strength, good elongation performance, large deformation modulus, acid and alkali resistance, corrosion resistance, aging resistance, good permeability, and other characteristics.
- It can meet the needs of civil engineering in water conservancy, municipal administration, construction, transportation, subway, tunnel, and engineering construction, such as anti-seepage, isolation, reinforcement, crack prevention, and reinforcement. Commonly used for anti-seepage treatment of dykes and drainage ditches, and anti-fouling treatment of waste yards.
HDC2 General Application(s):
- landfill lining
- tunnel construction
- liquid containment (artificial lakes/reservoirs/pond linings)
| PROPERTY | Unit | ENGLISH | METRIC |
|---|---|---|---|
| Membrane Thickness, (minimum average) | mm | 0.01 in | 0.25-0.35 |
| Tensile Properties | KN/m | 3576 lb/ft | 5 |
| Elongation at Break | % | 30-100 % | 30-100 |
| CBR Burst Strength | KN | 247 lbs | 1.1 |
| Tear Strength | KN | 34 lbs | 0.15 |
| Peel Strength | N/CM | ＞＝6/CM | ＞＝6/CM |
| One textile one membrane | Mpa | 58.02 Psi | 0.4 |
| Two textile one membrane | Mpa | 72.52 Psi | 0.5 |
| Memembrane Thickness | mm | 0.01 in | 0.2 |
| Mass per unit | g/m2 | 11.799 oz/y² | 400 |
- (1) Above values are on an average basis, the data was obtained from in-house test laboratory, National test institutes and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
- (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is set forth in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
- (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreed by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.
HDC2 Shipping & Packaging Information
| SIZE | DIAMETER | WIDTH | WEIGHT | AREA | ROLLS PER TRAILER |
|---|---|---|---|---|---|
| 4′ x 50′ | 50-55″ | 4′ | 90 Kg | 200 m2 | 60 |
| 6′ x 50′ | 50-55″ | 6′ | 130 Kg | 300 m2 | 40 |
HDC2 Industry Product Equivalents
ACF ACF N031, ADS ADS 0311T, BP-Amoco Amoco 4535, Carthage Mills FX-30HS, Contech C-31NW, Crown Resources/TNS Crown R031, Dalco Daltex 1031, EXXON Exxon GTF-125, Hanes Geo TerraTex N03, L&M Supply LM 310, Maccaferri MacTex N11.1, Mirafi Mirafi 135N, Propex Geotex 311, Synthetic Industries SI 311, Skaps Skaps GT131, Thrace-LINQ LINQ 120EX, Willacoochee Industries WINfab 310N
This information is provided for reference only and is not intended as a warranty or guarantee. US Fabrics assumes no liability in connection with the use of this information.
