GFE400
Nonwoven Geotextile
- 100% Polyester Continuous Filament Needle Punched non-woven Geotextile
- Raw material offers the most stable polymer against chemical / biological attacks in groundwater with extreme pH conditions.
- This range of geotextiles offers excellent energy absorption characteristics as well as hydraulic performance.
- This form of manufacturing offers superior hydraulic performance and high resistance to site installation stresses due to the nature of the continuous filament structure.
- It is extremely effective in reinforcing and protecting the granular layers, collecting surplus water from the structures and the soil, and providing hydraulic flow and soil retention, making them well-suited for filtration in subsurface drainage applications.
GFE400 General Application(s):
- Filtration
- Coastal hydraulic works
- Drainage
- Protection of geomembranes in landfill lining systems
| PROPERTY | Unit | TEST METHOD | ENGLISH | METRIC |
|---|---|---|---|---|
| Tensile strength | KN/m | ASTM D 4595 | 20023 lb/ft 16447 lb/ft | 28 23 |
| Tensile Elongation | % | ASTM D 4595 | 60 % 50 % | 60 % 50 % |
| Grab Strength | KN | ASTM D-4632 | 391 lbs 283 lbs | 1.74 1.26 |
| Grab Elongation | % | ASTM D-4632 | 60 % 50 % | 60 50 |
| Trapezoidal Tear | KN | ASTM D-4533 | 146 lbs 119 lbs | 0.65 0.53 |
| CBR Burst Strength | KN(>=) | ASTM D-6241 | 1169 lbs | 5.2 |
| Puncture resistance | KN(>=) | ASTM D-4833 | 144 lbs | 0.64 |
| Flow Rate, Q100 | L/s/m2 | ASTM D-4491 | 120 L/s/m2 | 120 |
| Permeability | cm/s | ASTM D-4491 | 0.30 cm/s | 0.30 |
| Apparent Opening Size O95 | mm(≤) | ASTM D-4751 | 170 US Sieve | 0.09 |
| Apparent Opening Size O90 | mm(≤) | ASTM D-4751 | 200 US Sieve | 0.08 |
| Thickness（2KP） | mm | ASTMD5199 | 0.16 in | 4.1 |
| Roll Width | m(≤) | 19.7 ft | 6 | |
| Roll Length | m(≥) | 295.3 ft | 90 | |
| Approx Load Q’ty / 40’ HC | Sq. m | 25834 Sq.yd | 21600 |
- (1) Above values are on an average basis, the data was obtained from in-house test laboratory, National test institutes and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
- (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is set forth in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
- (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreed by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.
GFE400 Shipping & Packaging Information
| SIZE | DIAMETER | WIDTH | WEIGHT | AREA | ROLLS PER TRAILER |
|---|---|---|---|---|---|
| 6M x 90M | 50-55 cm | 6M | 226 Kg | 540 m2 | 40 |
CERTIFICATES
GFE400 Industry Product Equivalents
ACF ACF N031, ADS ADS 0311T, BP-Amoco Amoco 4535, Carthage Mills FX-30HS, Contech C-31NW, Crown Resources/TNS Crown R031, Dalco Daltex 1031, EXXON Exxon GTF-125, Hanes Geo TerraTex N03, L&M Supply LM 310, Maccaferri MacTex N11.1, Mirafi Mirafi 135N, Propex Geotex 311, Synthetic Industries SI 311, Skaps Skaps GT131, Thrace-LINQ LINQ 120EX, Willacoochee Industries WINfab 310N
This information is provided for reference only and is not intended as a warranty or guarantee. US Fabrics assumes no liability in connection with the use of this information.
