GLP120
Nonwoven Geotextile
- Geofantex GLP is a non-woven geotextile perforated with a 100% polypropylene-staple fiber needle.
- The high-quality PP raw material offers the most stable polymer against chemical/biological attacks in groundwater with extreme pH conditions.
- Manufactured with curly short fibers, this range of geotextiles offers excellent features of energy absorption and hydraulic performance.
- Geofantex GLP is manufactured 6 meters wide, which reduces waste for fewer overlaps and allows a quick and easy installation
GLP120 General Application(s):
- Filtration
- Coastal hydraulic works
- Drainage
- Protection of geomembranes in landfill lining systems
| PROPERTY | Unit | TEST METHOD | ENGLISH | METRIC |
|---|---|---|---|---|
| Tensile strength | KN/m | ASTM D 4595 | 4291 lb/ft 3576 lb/ft | 6 5 |
| Tensile Elongation | % | ASTM D 4595 | 80 % 50 % | 80 % 50 % |
| Grab Strength | KN | ASTM D-4632 | 72 lbs 56 lbs | 0.32 0.25 |
| Grab Elongation | % | ASTM D-4632 | 80 % 50 % | 80 50 |
| Trapezoidal Tear | KN | ASTM D-4533 | 34 lbs 27 lbs | 0.15 0.12 |
| CBR Burst Strength | KN(>=) | ASTM D-6241 | 310 lbs 258 lbs | 1.38 1.15 |
| Puncture resistance | KN(>=) | ASTM D-4833 | 40 lbs 29 lbs | 0.18 0.13 |
| Cone drop (H50) | mm | BS EN 918 | 1.33 in | 34 |
| Flow Rate, Q100 | L/s/m2 | ASTM D-4491 | 250 L/s/m2 | 250 |
| Flow rate, 50mm head | L/s*sqm | EN ISO 11058 | 110 L/s*sqm | 110 |
| Apparent Opening Size O95 | mm(≤) | ASTM D-4751 | 140 US Sieve | 0.12 |
| Apparent Opening Size O90 | mm(≤) | EN ISO 12956 | 140 US Sieve | 0.12 |
| Permittivity | Sec-1 | ASTM D 4491 | 2.50Sec-1 | 2.5 |
| UV Resistance Strength Retained @ 500hrs | % | 70 % | 70 | |
| Thickness（2KP） | mm | ASTMD5199 | 0.06 in 0.04 in | 1.5 1.0 |
| Mass per Unit | g/m2 | ASTM D5261 | 3.540 oz/y² | 120 |
| Roll Width | m(≤) | 13.1/19.7 ft | 4/6 | |
| Roll Length | m(≥) | 1082.7 ft | 330 | |
| Approx Load Q’ty / 40’ HC | Sq. m | 113620 Sq.yd | 95000 |
- (1) Above values are on an average basis, the data was obtained from in-house test laboratory, National test institutes and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
- (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is set forth in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
- (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreed by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.
GLP120 Shipping & Packaging Information
| SIZE | DIAMETER | WIDTH | WEIGHT | AREA | ROLLS PER TRAILER |
|---|---|---|---|---|---|
| 4M x 330M | 50-55 cm | 4M | 168.4 Kg | 1320 m2 | 60 |
| 6M x 330M | 50-55 cm | 6M | 247.6 Kg | 1980 m2 | 40 |
GLP120 Industry Product Equivalents
ACF ACF N031, ADS ADS 0311T, BP-Amoco Amoco 4535, Carthage Mills FX-30HS, Contech C-31NW, Crown Resources/TNS Crown R031, Dalco Daltex 1031, EXXON Exxon GTF-125, Hanes Geo TerraTex N03, L&M Supply LM 310, Maccaferri MacTex N11.1, Mirafi Mirafi 135N, Propex Geotex 311, Synthetic Industries SI 311, Skaps Skaps GT131, Thrace-LINQ LINQ 120EX, Willacoochee Industries WINfab 310N
This information is provided for reference only and is not intended as a warranty or guarantee. US Fabrics assumes no liability in connection with the use of this information.
