HDPE 100

GeofanGridHD Geogrid

Request a quote for HDPE 100
  • GeofanGrid HDPE is manufactured using the proven “stamping and drawing techniques” using the most modern manufacturing technology.
  • Solid polymer films have openings that are removed by punching, and then the film is carefully stretched to achieve optimal molecular orientation within the monolithic polymer structure.
  • This allows high tear strengths of up to 160 kN/m to be achieved.
Date
Sheet Detail
Overview Drop-in
Specs

HDPE 100 General Application(s):

  • Minimal load when installed on site
  • High resistance to aggressive acid/alkaline groundwater conditions
  • Excellent creep properties
  • Globally recognized design standards for Mechanically Stabilized Earth Structures (MSE) such as BS8006 require that all of these technical characteristics be used to calculate the effective long-term allowable design strength to enable accurate designs
  • Application: Retaining walls, soil stabilization, earthing retaining walls and slopes, steep slopes, foundation support, dam construction on inferior soils
PropertiesTest MethodUnitSpecification
Carbon contentASTM D 4218≥%
2

Tensile strength
ASTM D 6637≥KN/m100

Strength at 2% elongation
ASTM D 6637KN/m29

Strength at 5% elongation
ASTM D 6637KN/m55

Yield Elongation Ratio
≤%12

Creep Reduction Factor for 114 Year Life (RFcr)
ASTM D 52622.23
  • (1) The above values are on an average basis, the data was obtained from in-house test laboratories, National test institutes, and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
  • (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is outlined in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
  • (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreement by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.

HDPE 100 Shipping and packaging information

Approximate load capacity per 40’HC(m2)
30000

Certificate

HDPE 100 Industry Product Equivalents

ACF ACF N031, ADS ADS 0311T, BP-Amoco Amoco 4535, Carthage Mills FX-30HS, Contech C-31NW, Crown Resources/TNS Crown R031, Dalco Daltex 1031, EXXON Exxon GTF-125, Hanes Geo TerraTex N03, L&M Supply LM 310, Maccaferri MacTex N11.1, Mirafi Mirafi 135N, Propex Geotex 311, Synthetic Industries SI 311, Skaps Skaps GT131, Thrace-LINQ LINQ 120EX, Willacoochee Industries WINfab 310N

This information is provided for reference only and is not intended as a warranty or guarantee. US Fabrics assumes no liability in connection with the use of this information.