PPD2020
PP Biaxial Plastic Geogrid
- A robust, biaxial geogrid manufactured from PP with the most proven “punch-and-drawing” techniques by using the most sophisticated manufacturing technology.
- Solid sheets of polymer have apertures removed by punching, and then the sheet is carefully stretched to achieve optimum molecular orientation to ensure the maximum design life of the material as a high modulus reinforcing layer within pavements.
- Typically used in basal reinforcement applications, the geogrid is used to absorb lateral forces that would be exerted upon the sub grade from traffic loading.
PPD2020 General Application(s):
sub-base reinforcement in pavements
basal reinforcement in unpaved & temporary roads
sub-grade stabilization
| PROPERTY | TEST METHOD | ENGLISH | METRIC |
|---|---|---|---|
| Longitudinal Tensile Strength | ASTM D 6637 | 14302 lb/ft | 20 kN/m |
| Transverse Tensile Strength | ASTM D 6637 | 14302 lb/ft | 20 kN/m |
| Longitudinal Yield Elongation | ASTM D 6637 | 15% | 15% |
| Transverse Yield Elongation | ASTM D 6637 | 13% | 13% |
| Longitudinal Strength at 2% Strain | ASTM D 6637 | 5006 lb/ft | 7 kN/m |
| Transverse Strength at 2% Strain | ASTM D 6637 | 5006 lb/ft | 7 kN/m |
| Longitudinal Strength at 5% Strain | ASTM D 6637 | 10011 lb/ft | 14 kN/m |
| Transverse Strength at 5% Strain | ASTM D 6637 | 10011 lb/ft | 14 kN/m |
| Junction Efficiency | GRI GG2 | 93% | 93% |
| Flexural Rigidity | ASTM D-7748 | 750000 mg-cm | 750000 mg-cm |
| Aperture Stability | ASTM D 7864 | 0.50 m-n/deg | 0.50 m-n/deg |
| Roll Length | Measured | 164/328 ft | 50/100 m |
| Roll Width | Measured | 6.6/12.8/13/13.1 ft | 2/3.9/3.95/4 m |
- (1) Above values are on an average basis, the data was obtained from in-house test laboratory, National test institutes and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
- (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is set forth in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
- (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreed by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.
PPD2020 运输和包装信息
| WIDTH | LENGTH | AREA |
|---|---|---|
| 2m | 50m 100m | 100m² 200m² |
| 3.9m | 50m 100m | 195m² 390m² |
| 3.95m | 50m 100m | 197.5m² 395m² |
| 4m | 50m 100m | 200m² 400m² |
CERTIFICATES
PPD2020 Industry Product Equivalents
ADS ADS BX124, Carthage Mills GBX-12, Hanes Geo TerraGrid RX1200, Mirafi Mirafi BXG120, Propex GRIDPRO BXP12, Syntec/GSE Syntec SBX12, Tensar BX1200, Thrace-LINQ LINQ TLG-12, Willacoochee Industries WINfab BX12
This information is provided for reference only and is not intended as a warranty or guarantee. Geofantex Geosynthetics assumes no liability in connection with the use of this information.
