WP200-30

GeofanGrid WP is a biaxial geogrid

Request a quote for WP200-30
  • Typically used in basal reinforcement applications, the WP geogrid is used to absorb lateral forces that would be exerted upon the sub grade from traffic loading stress.
  • GeofanGrid WP is a biaxial geogrid manufactured from high tenacity PET yarns encased in a protective polymeric coating to protect the material from chemical attack in the case of extreme pH conditions.
  • The high tenacity PET ensures maximum design life and excellent creep characteristics whilst the flexible nature of the material allows very fast and easy installation.
  • The load exerted by traffic is transferred to the geogrid by the interlocking action of the granular aggregate within the uniform apertures of the biaxial geogrid and the frictional resistance generated between the geogrid and sub base.
  • GeofanGrid WP offers very low elongation of 10% at ultimate load capacity, but more importantly the reinforcement the product provides means an increased lifetime for an unpaved road structure by reducing rutting, and therefore reduction in maintenance costs for both the road and vehicles that will use it.
  • For paved construction, the basal reinforcement provided by GeofanGrid WP will reduce the deformation at the formation layer and therefore negate this deformation from propagating to the road surface which can lead to pavement failure.
Date
Sheet Detail
Overview Drop-in
Specs

WP200-30 General Application(s):

  • sub-base reinforcement in pavements
  • basal reinforcement in unpaved & temporary roads
  • sub-grade stabilization
  • temporary site access roads
  • haul roads
PropertiesStandardUnitSpecification
MD
Tensile Strength
CD		ASTM D 6637KN/m200

30

Elongation Ratio
ASTM D 6637%10
  • (1) The above values are on an average basis, the data was obtained from in-house test laboratories, National test institutes, and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
  • (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is outlined in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
  • (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreement by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.

WP200-30 Shipping and packaging information

Aperture size (mm)Width (m)
25*251-6

Certificate

WP200-30 Industry Product Equivalents

ACF ACF N031, ADS ADS 0311T, BP-Amoco Amoco 4535, Carthage Mills FX-30HS, Contech C-31NW, Crown Resources/TNS Crown R031, Dalco Daltex 1031, EXXON Exxon GTF-125, Hanes Geo TerraTex N03, L&M Supply LM 310, Maccaferri MacTex N11.1, Mirafi Mirafi 135N, Propex Geotex 311, Synthetic Industries SI 311, Skaps Skaps GT131, Thrace-LINQ LINQ 120EX, Willacoochee Industries WINfab 310N

This information is provided for reference only and is not intended as a warranty or guarantee. US Fabrics assumes no liability in connection with the use of this information.