GFP150

Nonwoven Geotextile

Request a quote for GFP150
  • 100% Polypropylene Staple Fiber Needle Punched Non-Woven Geotextile.
  • Raw material offers the most stable polymer against chemical / biological attack in groundwater with extreme pH conditions.
  • This range of geotextiles offers excellent energy absorption characteristics as well as hydraulic performance.
  • Is made from the highest quality Polypropylene Staple Fibers and needle-punched to form dimensional structures, with Acid resistance.
  • Is extremely effective in reinforcing and protecting the granular layers, collecting surplus water from the structures and the soil, and also providing hydraulic flow and soil retention, which makes them well-suited for filtration in subsurface drainage applications.
Date
Sheet
Detail
Overview
Drop-in
Specs

GFP150 General Application(s):

  • Filtration
  • Coastal hydraulic works
  • Drainage
  • Protection of geomembranes in landfill lining systems
PROPERTYUnitTEST METHODENGLISHMETRIC
Tensile strengthKN/mASTM D 45957151 lb/ft
5578 lb/ft
10
7.8
Tensile Elongation%ASTM D 459570 %
50 %
70 %
50 %
Grab StrengthKNASTM D-4632117 lbs
88 lbs
0.52
0.39
Grab Elongation%ASTM D-463270 %
50 %
70
50
Trapezoidal TearKNASTM D-453354 lbs
40 lbs
0.24
0.18
CBR Burst StrengthKN(>=)ASTM D-6241375 lbs
281 lbs
1.67
1.25
Puncture resistanceKN(>=)ASTM D-483370  lbs
49 lbs
0.31
0.22
Flow Rate, 100mm headL/s/m2ASTM D-4491142 L/s/m2142
Flow Rate, 50mm headL/min/ m2ASTM D-4491116 g/min/f²4735
Apparent Opening Size O95microns
ASTM D-4751140 US Sieve110
Apparent Opening Size O90μm≤EN ISO 12956140 US Sieve120
PermittivitySec-1ASTM D 44912.3 Sec⁻¹2.3
UV Resistance Strength Retained @ 500hrs%%70%70%
Thickness(2KP)mmASTMD51990.04 in
0.04 in
1.1
0.9
Mass per Unitg/m2ASTM D52614.425 oz/y²150
Roll Widthm(≤)6.6/13.1/19.7 ft2/4/6
Roll Lengthm(≥)951.5 ft 290
Approx Load Q’ty / 40’ HQSq. m83242 Sq.yd69600
  • (1) The above values are on an average basis, the data was obtained from in-house test laboratories, National test institutes, and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
  • (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is set forth in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
  • (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreement by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.

GFP150 Shipping & Packaging Information

SIZEDIAMETERWIDTHWEIGHTAREAROLLS PER TRAILER
2M x 290M50-55 cm2M88 Kg580 m2120
4M x 290M50-55 cm4M184 Kg1160 m²60
6M x 290M50-55 cm6M271 Kg1740 m²40

Certificate

GFP150 Industry Product Equivalents

ACF ACF N045, ADS ADS 0451T, BP-Amoco Amoco 4547, Carthage Mills FX-45HS, Contech C-45NW, Crown Resources/TNS Crown R042, Dalco Daltex 1045, EXXON Exxon GTF-140, GSE GSE CE4, Hanes Geo TerraTex N04.5, L&M Supply LM 450 NT, Layfield Group LP4.5, Maccaferri MacTex N21.1, Mirafi Mirafi 140N, Mutual Industries MI NW45, Propex Geotex 401, Synthetic Industries SI 451, Skaps Skaps GT142, Supac Supac 4.5NP, Terrafix Terrafix 300R, Thrace-LINQ LINQ 140EX, Willacoochee Industries WINfab 450N

This information is provided for reference only and is not intended as a warranty or guarantee. US Fabrics assumes no liability in connection with the use of this information.