GFP350

Nonwoven Geotextile

Request a quote for GFP350
  • 100% Polypropylene Staple Fiber Needle Punched Non-Woven Geotextile.
  • Raw material offers the most stable polymer against chemical / biological attack in groundwater with extreme pH conditions.
  • This range of geotextiles offers excellent energy absorption characteristics as well as hydraulic performance.
  • Is made from the highest quality Polypropylene Staple Fibers and needle-punched to form dimensional structures, with Acid resistance.
  • Is extremely effective in reinforcing and protecting the granular layers, collecting surplus water from the structures and the soil, and also providing hydraulic flow and soil retention, which makes them well-suited for filtration in subsurface drainage applications.
Date
Sheet
Detail
Overview
Drop-in
Specs

GFP350 General Application(s):

  • Filtration
  • Coastal hydraulic works
  • Drainage
  • Protection of geomembranes in landfill lining systems
PROPERTYUnitTEST METHODENGLISHMETRIC
Tensile strengthKN/mASTM D 459517878  lb/ft
13587  lb/ft
25
19
Tensile Elongation%ASTM D 459560 %
50 %
60 %
50 %
Grab StrengthKNASTM D-4632297 lbs
245 lbs
1.32
1.09
Grab Elongation%ASTM D-463260 %
50 %
60
50
Trapezoidal TearKNASTM D-4533115 lbs
97 lbs
0.51
0.43
CBR Burst StrengthKN(>=)ASTM D-6241854 lbs
719 lbs
3.8
3.2
Puncture resistanceKN(>=)ASTM D-4833162 lbs
130 lbs
0.72
0.58
Flow Rate, 100mm headL/s/m2ASTM D-449161 L/s/m261
Flow Rate, 50mm headL/min/ m2ASTM D-449159 g/min/f²2397
Apparent Opening Size O95microns
ASTM D-4751200 US Sieve75
Apparent Opening Size O90μm≤EN ISO 12956140 US Sieve110
PermittivitySec-1ASTM D 44910.9 Sec⁻¹0.9
UV Resistance Strength Retained @ 500hrs%%70%70%
Thickness(2KP)mmASTMD51990.08 in
0.07 in
2.0
1.8
Mass per Unitg/m2ASTM D526110.324 oz/y²350
Roll Widthm(≤)6.6/13.1/19.7 ft2/4/6
Roll Lengthm(≥)410.1 ft 125
Approx Load Q’ty / 40’ HQSq. m35880  Sq.yd30000
  • (1) The above values are on an average basis, the data was obtained from in-house test laboratories, National test institutes, and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
  • (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is set forth in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
  • (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreement by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.

GFP350 Shipping & Packaging Information

SIZEDIAMETERWIDTHWEIGHTAREAROLLS PER TRAILER
2M x 125M50-55 cm2M97.5 Kg250 m2120
4M x 125M50-55 cm4M185 Kg500 m²60
6M x 125M50-55 cm6M272.5 Kg750 m²40

Certificate

GFP350 Industry Product Equivalents

ACF ACF N120, ADS ADS 1201T, AEF AEF 1280, BP-Amoco Amoco 4512, Carthage Mills FX-120HS, Contech C-120NW, Crown Resources/TNS Crown R120, Dalco Daltex 1120, EXXON Exxon GTF-275, Hanes Geo TerraTex N012, L&M Supply LM 1200 NT, Layfield Group LP12, Maccaferri MacTex N70.1, Mirafi Mirafi 1120N, Mutual Industries MI NW120, Propex Geotex 1201, Synthetic Industries SI 1201, Skaps Skaps GT112, Supac Supac 12NP, Terrafix Terrafix 800R, Thrace-LINQ LINQ 275EX, Trevira Trevira 1145, Willacoochee Industries WINfab 1200N

This information is provided for reference only and is not intended as a warranty or guarantee. US Fabrics assumes no liability in connection with the use of this information.