GFP300
Nonwoven Geotextile
- 100% Polypropylene Staple Fiber Needle Punched Non-Woven Geotextile.
- Raw material offers the most stable polymer against chemical / biological attack in groundwater with extreme pH conditions.
- This range of geotextiles offers excellent energy absorption characteristics as well as hydraulic performance.
- Is made from the highest quality Polypropylene Staple Fibers and needle-punched to form dimensional structures, with Acid resistance.
- Is extremely effective in reinforcing and protecting the granular layers, collecting surplus water from the structures and the soil, and also providing hydraulic flow and soil retention, which makes them well-suited for filtration in subsurface drainage applications.
GFP300 General Application(s):
- Filtration
- Coastal hydraulic works
- Drainage
- Protection of geomembranes in landfill lining systems
| PROPERTY | Unit | TEST METHOD | ENGLISH | METRIC |
|---|---|---|---|---|
| Tensile strength | KN/m | ASTM D 4595 | 15017 lb/ft 12157 lb/ft | 21 17 |
| Tensile Elongation | % | ASTM D 4595 | 60 % 50 % | 60 % 50 % |
| Grab Strength | KN | ASTM D-4632 | 223 lbs 169 lbs | 0.99 0.75 |
| Grab Elongation | % | ASTM D-4632 | 60 % 50 % | 60 50 |
| Trapezoidal Tear | KN | ASTM D-4533 | 99 lbs 85 lbs | 0.44 0.38 |
| CBR Burst Strength | KN(>=) | ASTM D-6241 | 764 lbs 674 lbs | 3.4 3.0 |
| Puncture resistance | KN(>=) | ASTM D-4833 | 128 lbs 112 lbs | 0.57 0.50 |
| Flow Rate, 100mm head | L/s/m2 | ASTM D-4491 | 75 L/s/m2 | 75 |
| Flow Rate, 50mm head | L/min/ m2 | ASTM D-4491 | 65 g/min/f² | 2659 |
| Apparent Opening Size O95 | microns ≤ | ASTM D-4751 | 170 US Sieve | 90 |
| Apparent Opening Size O90 | μm≤ | EN ISO 12956 | 140 US Sieve | 120 |
| Permittivity | Sec-1 | ASTM D 4491 | 1.1 Sec⁻¹ | 1.1 |
| UV Resistance Strength Retained @ 500hrs | % | % | 70% | 70% |
| Thickness（2KP） | mm | ASTMD5199 | 0.06 in 0.05 in | 1.5 1.3 |
| Mass per Unit | g/m2 | ASTM D5261 | 8.850 oz/y² | 300 |
| Roll Width | m(≤) | 6.6/13.1/19.7 ft | 2/4/6 | |
| Roll Length | m(≥) | 475.7 ft | 145 | |
| Approx Load Q’ty / 40’ HQ | Sq. m | 41621 Sq.yd | 34800 |
- (1) The above values are on an average basis, the data was obtained from in-house test laboratories, National test institutes, and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
- (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is set forth in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
- (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreement by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.
GFP300 Shipping & Packaging Information
| SIZE | DIAMETER | WIDTH | WEIGHT | AREA | ROLLS PER TRAILER |
|---|---|---|---|---|---|
| 2M x 145M | 50-55 cm | 2M | 97 Kg | 290 m2 | 120 |
| 4M x 145M | 50-55 cm | 4M | 184 Kg | 580 m² | 60 |
| 6M x 145M | 50-55 cm | 6M | 271 Kg | 870 m² | 40 |
Certificate
GFP300 Industry Product Equivalents
ACF ACF N080, ADS ADS 0801T, AEF AEF 880, BP-Amoco Amoco 4553, Carthage Mills FX-80HS, Contech C-80NW, Crown Resources/TNS Crown R080, Dalco Daltex 1080, EXXON Exxon GTF-180, GSE GSE CE8, Hanes Geo TerraTex N08, L&M Supply LM 800 NT, Layfield Group LP8, Maccaferri MacTex N47.1, Mirafi Mirafi 180N, Mutual Industries MI NW80, Propex Geotex 801, Synthetic Industries SI 801, Skaps Skaps GT180, Supac Supac 8NP, Terrafix Terrafix 420R, Thrace-LINQ LINQ 180EX, Willacoochee Industries WINfab 800N
This information is provided for reference only and is not intended as a warranty or guarantee. US Fabrics assumes no liability in connection with the use of this information.
