GFP450

Nonwoven Geotextile

Request a quote for GFP450
  • 100% Polypropylene Staple Fiber Needle Punched Non-Woven Geotextile.
  • Raw material offers the most stable polymer against chemical / biological attack in groundwater with extreme pH conditions.
  • This range of geotextiles offers excellent energy absorption characteristics as well as hydraulic performance.
  • Is made from the highest quality Polypropylene Staple Fibers and needle-punched to form dimensional structures, with Acid resistance.
  • Is extremely effective in reinforcing and protecting the granular layers, collecting surplus water from the structures and the soil, and also providing hydraulic flow and soil retention, which makes them well-suited for filtration in subsurface drainage applications.
Date
Sheet
Detail
Overview
Drop-in
Specs

GFP450 General Application(s):

  • Filtration
  • Coastal hydraulic works
  • Drainage
  • Protection of geomembranes in landfill lining systems
PROPERTYUnitTEST METHODENGLISHMETRIC
Tensile strengthKN/mASTM D 459522883 lb/ft
17878 lb/ft
32
25
Tensile Elongation%ASTM D 459560 %
50 %
60 %
50 %
Grab StrengthKNASTM D-4632393 lbs
303 lbs
1.75
1.35
Grab Elongation%ASTM D-463260 %
50 %
60
50
Trapezoidal TearKNASTM D-4533153 lbs
117 lbs
0.68
0.52
CBR Burst StrengthKN(>=)ASTM D-62411191 lbs
899 lbs
5.3
4.0
Puncture resistanceKN(>=)ASTM D-4833218 lbs
173 lbs
0.97
0.77
Flow Rate, 100mm headL/s/m2ASTM D-449150 L/s/m250
Flow Rate, 50mm headL/min/ m2ASTM D-449150 g/min/f²2045
Apparent Opening Size O95microns
ASTM D-4751200 US Sieve75
Apparent Opening Size O90μm≤EN ISO 12956140 US Sieve110
PermittivitySec-1ASTM D 44910.7 Sec⁻¹0.7
UV Resistance Strength Retained @ 500hrs%%70%70%
Thickness(2KP)mmASTMD51990.10 in
0.09 in
2.5
2.2
Mass per Unitg/m2ASTM D526113.274 oz/y²450
Roll Widthm(≤)6.6/13.1/19.7 ft2/4/6
Roll Lengthm(≥)328.1 ft 100
Approx Load Q’ty / 40’ HQSq. m28704 Sq.yd24000
  • (1) The above values are on an average basis, the data was obtained from in-house test laboratories, National test institutes, and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
  • (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is set forth in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
  • (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreement by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.

GFP450 Shipping & Packaging Information

SIZEDIAMETERWIDTHWEIGHTAREAROLLS PER TRAILER
2M x 100M50-55 cm2M100 Kg200 m2120
4M x 100M50-55 cm4M190 Kg400 m²60
6M x 100M50-55 cm6M280 Kg600 m²40

Certificate

GFP450 Industry Product Equivalents

ACF ACF N031, ADS ADS 0311T, BP-Amoco Amoco 4535, Carthage Mills FX-30HS, Contech C-31NW, Crown Resources/TNS Crown R031, Dalco Daltex 1031, EXXON Exxon GTF-125, Hanes Geo TerraTex N03, L&M Supply LM 310, Maccaferri MacTex N11.1, Mirafi Mirafi 135N, Propex Geotex 311, Synthetic Industries SI 311, Skaps Skaps GT131, Thrace-LINQ LINQ 120EX, Willacoochee Industries WINfab 310N

This information is provided for reference only and is not intended as a warranty or guarantee. US Fabrics assumes no liability in connection with the use of this information.