HDPE65
HDPE Uniaxial Geogrid
- The polymer is in a directional linear state and forms a long elliptical network integral structure with uniform distribution and high node strength. This kind of structure has quite high tensile strength and rigidity and provides the ideal force bearing and spreading interlocking system for the soil.
- The outstanding advantage of uniaxial geogrid is that it has little tendency to deform (creep) under long-term continuous load, and its creep resistance is much better than geogrids of other materials, which play an important role in improving the service life of the project.
- The interlocking action between the grid mesh and the soil constitutes an efficient stress transmission mechanism so that the local load can quickly and effectively spread to a large area of the soil, thereby reducing the local damage stress and improving The purpose of the service life of the project.
HDPE65 General Application(s):
- Retaining walls
- Steep slopes
- Ground stabilization
- Foundation support
- Earth retaining walls and slopes
- Embankment construction over poor-quality soils
| PROPERTY | TEST METHOD | ENGLISH | METRIC |
|---|---|---|---|
| Carbon Content | ASTM D 4218 | 2% (≥) | 2% (≥) |
| ≥%Tensile Strength | ASTM D 6637 | 46482 lb/ft | 65 kN/m (≥) |
| Strength at 2% Elongation | ASTM D 6637 | 12872 lb/ft | 18 KN/m |
| Strength at 5% Elongation | ASTM D 6637 | 25029 lb/ft | 35 KN/m |
| Yield Elongation Ratio | 12% (≤) | 12% (≤) | |
| Reduction Factor for Creep for 114-year Design life (RFcr) | ASTM D 5262 | 2.23 | 2.23 |
| Approx Load Q’ty per 40’HC | 354542 ft² | 32950 m2 |
- (1) Above values are on an average basis, the data was obtained from in-house test laboratory, National test institutes and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
- (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is set forth in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
- (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreed by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.
HDPE65 运输和包装信息
| WIDTH | LENGTH | AREA |
|---|---|---|
| 1m | 50m 100m | 50 m² 100 m² |
| 1.2m | 50m 100m | 60 m² 120 m² |
Certificate
HDPE65 Industry Product Equivalents
ADS ADS BX114, Carthage Mills GBX-11, Hanes Geo TerraGrid RX1100, Mirafi Mirafi BXG110, Propex GRIDPRO BXP11, Syntec/GSE Syntec SBX11, Tensar BX1100, Thrace-LINQ LINQ TLG-11, Willacoochee Industries WINfab BX11
This information is provided for reference only and is not intended as a warranty or guarantee. Geofantex Geosynthetics assumes no liability in connection with the use of this information.
