GFP250

Nonwoven Geotextile

Request a quote for GFP250
  • 100% Polypropylene Staple Fiber Needle Punched Non-Woven Geotextile.
  • Raw material offers the most stable polymer against chemical / biological attack in groundwater with extreme pH conditions.
  • This range of geotextiles offers excellent energy absorption characteristics as well as hydraulic performance.
  • Is made from the highest quality Polypropylene Staple Fibers and needle-punched to form dimensional structures, with Acid resistance.
  • Is extremely effective in reinforcing and protecting the granular layers, collecting surplus water from the structures and the soil, and also providing hydraulic flow and soil retention, which makes them well-suited for filtration in subsurface drainage applications.
Date
Sheet
Detail
Overview
Drop-in
Specs

GFP250 General Application(s):

  • Filtration
  • Coastal hydraulic works
  • Drainage
  • Protection of geomembranes in landfill lining systems
PROPERTYUnitTEST METHODENGLISHMETRIC
Tensile strengthKN/mASTM D 459512157 lb/ft
10727 lb/ft
17
15
Tensile Elongation%ASTM D 459570 %
50 %
70 %
50 %
Grab StrengthKNASTM D-4632196 lbs
157 lbs
0.87
0.70
Grab Elongation%ASTM D-463260 %
50 %
60
50
Trapezoidal TearKNASTM D-453388 lbs
67 lbs
0.39
0.30
CBR Burst StrengthKN(>=)ASTM D-6241623 lbs
512 lbs
2.77
2.41
Puncture resistanceKN(>=)ASTM D-4833112 lbs
85 lbs
0.50
0.38
Flow Rate, 100mm headL/s/m2ASTM D-449185.5 L/s/m285.5
Flow Rate, 50mm headL/min/ m2ASTM D-449172 g/min/f²2922
Apparent Opening Size O95microns
ASTM D-4751170 US Sieve90
Apparent Opening Size O90μm≤EN ISO 12956140 US Sieve120
PermittivitySec-1ASTM D 44911.3 Sec⁻¹1.3
UV Resistance Strength Retained @ 500hrs%%70%70%
Thickness(2KP)mmASTMD51990.05 in
0.04 in
1.3
1.1
Mass per Unitg/m2ASTM D52617.375 oz/y²250
Roll Widthm(≤)6.6/13.1/19.7 ft2/4/6
Roll Lengthm(≥)574.2 ft 175
Approx Load Q’ty / 40’ HQSq. m50232 Sq.yd42000
  • (1) The above values are on an average basis, the data was obtained from in-house test laboratories, National test institutes, and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
  • (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is set forth in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
  • (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreement by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.

GFP250 Shipping & Packaging Information

SIZEDIAMETERWIDTHWEIGHTAREAROLLS PER TRAILER
2M x 175M50-55 cm2M97.5 Kg350 m2120
4M x 175M50-55 cm4M185 Kg700 m²60
6M x 175M50-55 cm6M272.5 Kg1050 m²40

Certificate

GFP250 Industry Product Equivalents

ACF ACF N080, ADS ADS 0801T, AEF AEF 880, BP-Amoco Amoco 4553, Carthage Mills FX-80HS, Contech C-80NW, Crown Resources/TNS Crown R080, Dalco Daltex 1080, EXXON Exxon GTF-180, GSE GSE CE8, Hanes Geo TerraTex N08, L&M Supply LM 800 NT, Layfield Group LP8, Maccaferri MacTex N47.1, Mirafi Mirafi 180N, Mutual Industries MI NW80, Propex Geotex 801, Synthetic Industries SI 801, Skaps Skaps GT180, Supac Supac 8NP, Terrafix Terrafix 420R, Thrace-LINQ LINQ 180EX, Willacoochee Industries WINfab 800N

This information is provided for reference only and is not intended as a warranty or guarantee. US Fabrics assumes no liability in connection with the use of this information.