Mechanical PROPERTY	TEST METHOD	Unit	METRIC	Note
Tensile Strength MD	ASTM D 4595	KN/m >=	100
CD Tensile Strength	ASTM D 4595	KN/m >=	70	MD/CD Average
Tensile Elongation	ASTM D 4595	% ＜=
Widths windage		%	7.5
CBR Puncture
Resistance	ASTM D 6241	KN>=
Pore Size O90 (O95)	ASTM D 4751	mm
Vertical Permeability	ASTM D 4491	cm/s		K=1.0-99
UV Resistance Strength	retention ASTM D 4355	% >=		MD/CD Average
Tear Strength	ASTM D 4533	KN >=	1.2

Physical Identification Properties	Unit	METRIC
Mass per unit area	g/m2	400
warp	%
Roll Width	m(≥)	5.95
Approx. Loading Q’ty Per 40’ HQ	Sqmts	59,500

• ⁽¹⁾ The above values are on an average basis, the data was obtained from in-house test laboratories, National test institutes, and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
• ⁽²⁾ Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is outlined in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
• ⁽³⁾ Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreement by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.

WN 070 Shipping and packaging information

LENGTH(m)	WIDTH(m)	DIAMETER(m)	WEIGHT(kg)	AREA(㎡)	ROLLS PER TRAILER
655	4	0.55	198.4	2620	60
655	6	0.55	290.1	3930	40

WN 070 Industry Product Equivalents

ACF ACF N031, ADS ADS 0311T, BP-Amoco Amoco 4535, Carthage Mills FX-30HS, Contech C-31NW, Crown Resources/TNS Crown R031, Dalco Daltex 1031, EXXON Exxon GTF-125, Hanes Geo TerraTex N03, L&M Supply LM 310, Maccaferri MacTex N11.1, Mirafi Mirafi 135N, Propex Geotex 311, Synthetic Industries SI 311, Skaps Skaps GT131, Thrace-LINQ LINQ 120EX, Willacoochee Industries WINfab 310N

This information is provided for reference only and is not intended as a warranty or guarantee. US Fabrics assumes no liability in connection with the use of this information.