Filter Fabric for Slope Stabilization

6 oz Nonwoven Geotextile at bulk pricing and ships to you. 6 oz. nonwoven geotextiles are the first size in the medium-weight class for synthetic geotextiles. The medium weights range from 6-8 oz and can take on heavier applications than a lightweight filter fabric. They are a better sediment filter when running liquid through the textile, and when it comes to strength, they can stabilize, separate, and support erosion as well.

6 oz. nonwoven geotextiles are made from needle-punctured polypropylene and feature a grab tensile strength of 160 pounds. More cost-effective, stronger, and better at filtering than organic geotextiles, our nonwoven geotextiles are often better suited for erosion control applications.

Nonwoven Geotextiles come in tensile strengths ranging from 80 to 380 pounds. Additionally, all polypropylene geotextiles are UV and chemical resistance.

Contact Us

Nonwoven Geotextile

6 oz. Woven Geotextile Fabric Features

  • Fabric: Needle Punctured Polypropylene
  • Roll Sizes: 12.5′ x 360′ and 15′ x 300′
  • Roll Weight: 160 lbs
  • Water Flow Rate: 110 gpm/ft²

6 oz. Woven Geotextile Fabric Benefits

  • Cost Effective Erosion Control
  • Naturally Holds up to UV Rays
  • Resists Exposure to Chemicals
  • Filters and Retains Sediment
  • Medium Weight Geotextile Fabric
  • Flexible Design

Mirafi® Nonwoven Geotextile Filter Fabric

We also carry Mirafi® N-Series nonwoven geotextile fabric. This needle-punched filter fabric is constructed to conform to trench or ground surfaces for problem free installation. The N-series filter fabric’s high flow-through rate makes this drainage fabric perfect for drainage and filtration applications. This geo filter fabric is effective in critical subsurface drainage systems, permanent erosion control, soil separation, and geo-membrane liner protection in landfills. Mirafi® filter fabrics is appropriate for French drains and other soil separation. Our nonwoven geotextile filter fabric eliminates the challenge of determining aggregate gradation required to match soil conditions, providing effective filter performance.

liner protection in landfills. Mirafi® filter fabrics is appropriate for French drains and other soil separation. Our nonwoven geotextile filter fabric eliminates the challenge of determining aggregate gradation required to match soil conditions, providing effective filter performance.

Find out more about the Mirafi® N-Series or visit our Mirafi® Nonwoven Geotextile page to see all of our Mirafi® options.

6 oz. Woven Geotextile Fabric Erosion Control Applications

  • Separation
  • Stabilization
  • Sediment Filter
  • Erosion Control
  • River Embankment
  • Rip Rap Stabilization
  • Subsurface Applications
Nonwoven Geotextile

6 oz. Nonwoven Geotextile Technical Specifications

PropertyTest MethodUnitMinimum Average Roll Value (M.A.R.V.)
WeightASTM D5261oz/yd² (g/m²)6 (203)
Grab TensileASTM D4632lbs (kN)160 (.711)
Trapezoid Tear StrengthASTM D4632lbs (kN)65 (.267)
Grab ElongationASTM D4632%50
PermittivityASTM D4491sec-11.5
Water FlowASTM D4491gpm/ft² (l/min/m²)110 (4480)
A.O.SASTM D4491U.S. Sieve70 (.212)
UV ResistanceASTM D4355%/hrs70/500
Roll Sizes12.5′ W x 360′ L (4,500 ft²/roll) 15′ W x 300′ L (5,400 ft²/roll)
For geotextile securement accessories, please call us at 1-863-251-5111! 

If our nonwoven geotextiles are too flexible or not strong enough, try Woven Geotextiles. These textiles are designed for high strength stabilization areas, have a wide range of thicknesses, weight, and tensile strength that tend to be higher then the nonwoven.

Customers Who Viewed This Product Also Viewed

   
4.5 oz Nonwoven Geotextile8 oz Nonwoven Geotextile10 oz Nonwoven Geotextile

If you have questions about products, give us a call at 1-863-251-5111 or request a price quote.

Contact Us