Fiberglass Geogrid – Geofantex
Geofangrid FG is a biaxial geogrid made from fiberglass filaments, encased by a polymeric protective coating. This results in a high modulus of elasticity at low elongation that can offer a large increase in the effective service life of a road pavement structure.
Fiberglass Geogrid has equal tensile strength in both directions and has ultimate tensile strengths ranging from 25kN/m up to 200kN/m. Or could be manufactured according to your inquiry, MINIMUM ORDER QUANTITY: 20’ft Container
|Properties [ASTM D 6637]||Unit||FG25-25||FG50-50||FG65-65||FG80-80||FG100-100||FG200-200|
|Tensile Strength MD||≥KN/M||25||50||65||80||100||200|
|Tensile Strength CD||≥KN/M||25||50||65||80||100||200|
|Elongation Ratio||≤ %||3||3||3||3||3||3|
The Applications of Fiberglass Geogrid – Geofantex
- Reinforce the old asphalt concrete pavement to strengthen the asphalt surface to prevent and control diseases.
- The cement concrete pavement is converted into a composite pavement to suppress reflection cracks caused by plate shrinkage.
- Road extension and renovation project to prevent cracks caused by new and old junctions and uneven settlement.
- Reinforcement treatment of soft soil foundation is conducive to water seepage and consolidation of soft soil, effectively inhibits settlement, uniform stress distribution, and enhances the overall strength of the roadbed.
- The semi-rigid base layer of the newly built road produces shrinkage cracks, and it is reinforced to prevent road cracks caused by reflection of foundation cracks.
Fiberglass Geogrid Role in engineering – Geofantex
The product has the characteristics of high strength, low elongation, high-temperature resistance, high modulus, lightweight, good toughness, corrosion resistance, long life, etc.
It can be widely used in engineering fields such as the maintenance of old cement pavements, airport runways, dams, riverbanks, slope protection, road and bridge pavement enhancement treatment, etc.
It can strengthen and reinforce the road surface, prevent road rut fatigue cracks, hot and cold expansion cracks, and reflection cracks below, and can disperse the bearing stress of the road surface and prolong the service life of the road surface.
High tensile strength, low elongation, no long-term creep, good physical and chemical stability, and good thermal stability
Anti-fatigue cracking, high-temperature rutting resistance, low-temperature shrinkage resistance, delay reduction of reflection cracks.
Geofantex Geosynthetics have to make a series of guarantee for our products both plant processing and selling out to our customers. The selling to you is the first step, the service and guarantee is our task. Geofantex Geosynthetics have an ISO Certificate to guarantee the raw material, the product processing, and the end product. From receiving your order to replacement and installation of the products, we have solved the problems in time if you need, whatever the quality and technics guideline or suggestions. Our company has been committed to supplying high-quality products with reasonable price and delivery in time.
GEOFANTEX has an on-site Manufacturing Quality Assurance Laboratory at the factory. GEOFANTEX maintains a high level of quality and up-to-the-minute results on finished products through a fully equipped, well-staffed, dedicated laboratory existing in each of the manufacturing facilities. Each facility follows the same guidelines for evaluating the quality of GEOFANTEX products and is capable of adapting to market-driven requirements.
The objective of the GEOFANTEX Quality Assurance program is to define the implementation of basic manufacturing quality assurance (MQA) procedures necessary to ensure the consistent production of quality products supplied to the geosynthetic market. Note that at this time, these procedures are limited to Fiberglass Geogrid.
In order to achieve GEOFANTEX’s stated purpose, a rigorous set of minimum standards and an effective test program to assure compliance have been established. These procedures and requirements are frequently reviewed and adjusted to assure compliance with current market demands and/or predetermined project specifications. These procedures assure that raw materials and process parameters are controlled to provide products complying with GEOFANTEX’s pre-defined minimum characteristics.
PET Geogrid PRODUCT IDENTIFICATION AND DOCUMENTATION
A. Roll Numbering
Each roll of Fiberglass Geogrid is assigned a unique roll number. The Quality Assurance Laboratory maintains records documenting the raw materials and resulting product quality information.
B. Approval Procedure
Results for each tested roll of the product are checked against both GEOFANTEX China standard and customer specifications for compliance. The Quality Assurance Laboratory approves those materials that meet these requirements for shipment.
Material that does not meet GEOFANTEX minimum standards is given a roll number but is rejected and not placed into inventory. The material is identified as scrap and will not be utilized. Material that meets GEOFANTEX minimum standards but does not meet a stricter customer specification is not allocated to that customer but is placed into inventory as GEOFANTEX standard material.
Individual Quality Assurance Certificates are generated and supplied for each roll of Fiberglass Geogrid product to include all relevant quality assurance information about the material(s).
Geofantex Geosynthetics have a series of package and delivery service working procedures. Geofantex Geosynthetics have supplied thousands of containers to Latin America, North America, Southeast Asia, developed countries, and Africa within the past ten years. We provide the package of products with the rolls, pots, bags, sheets, or your requirement in orders. Our company has been committed to supplying high-quality products with reasonable price and delivery in time. Delivery one 40’HQ within 7 – 10 days. And we have an obligation in increasing loading quantity and make you save the freight costs maximumly. We supply the products by plane, by sea and land carriage to any regions or any countries of the worldwide, even the door-to-door service.
What is Fiberglass Geogrid – Geofantex
The fiberglass geogrid is a mesh structure material made of fiberglass and a certain weaving process. In order to protect the fiberglass and improve the overall performance, the geocomposite is made by a special coating process. The main components of glass fiber are: silicon oxide, an inorganic material, its physical and chemical properties are extremely stable, and have high strength, high modulus, high wear resistance and excellent cold resistance, no long-term creep; thermal stability Good performance; the net structure enables the aggregate to be locked and restricted; it improves the load-bearing capacity of the asphalt mixture. Because the surface is coated with special modified asphalt, it has double compound performance, which greatly improves the abrasion resistance and shearing ability of the geogrid.
Sometimes combined with self-adhesive pressure-sensitive adhesive and surface asphalt impregnation treatment, the grille and the asphalt pavement are closely integrated into one. As the interlocking force of soil and rock materials in the geogrid grid increases, the friction coefficient between them increases significantly (up to 08～10). The frictional bite force is stronger and significantly increased, so it is a good reinforced material. At the same time, the geogrid is a kind of plastic flat mesh material with lightweight and certain flexibility, which is easy to cut and connect on-site and can also be overlapped and overlapped. The construction is simple and does not require special construction machinery and professional technicians.
Get the latest price?
We’ll respond as soon as possible(within 12 hours)